This is TeX, C Version 3.14t3 (format=latex2e 94.4.25)  4 AUG 1997 10:59
**&latex2e abss
(abss.tex
LaTeX2e <1994/02/03> PRELIMINARY TEST RELEASE
(/usr/users/software/tex/lib/tex/latex2e/latex209.def
Entering LaTeX 2.09 compatibility mode <1994/02/10>.
\footheight=\dimen104
\@maxsep=\dimen105
\@dblmaxsep=\dimen106
(/usr/users/software/tex/lib/tex/latex2e/tracefnt.sty
Package: `tracefnt' v2.3c <1994/01/26> (FMi and RmS)
English Documentation      <1994/01/17> (FMi and RmS)
\tracingfonts=\count83
)
\symbold=\mathgroup4
\symsans=\mathgroup5
\symtypewriter=\mathgroup6
\symitalic=\mathgroup7
\symsmallcaps=\mathgroup8
\symslanted=\mathgroup9

Font Info: Redeclaring math alphabet \mathbf on input line 130.


Font Info: Redeclaring math alphabet \mathsf on input line 131.


Font Info: Redeclaring math alphabet \mathtt on input line 132.


Font Info: Redeclaring math alphabet \mathit on input line 138.


(/usr/users/software/tex/lib/tex/latex2e/latexsym.sty
Package: `latexsym' v2.1a  <93/12/06> (FMi)
English Documentation      <93/12/06> (FMi)
\symlasy=\mathgroup10
Font Note: Overwriting symbol font `lasy' in version `bold'
Font           U/lasy/m/n --> U/lasy/b/n on input line 52.
)
Font Note: Redeclaring math delimiter \lgroup on input line 196.
Font Note: Redeclaring math delimiter \rgroup on input line 198.
Font Note: Redeclaring math delimiter \bracevert on input line 200.
) (/usr/users/software/tex/lib/tex/latex2e/article.cls
Standard Document Class `article' <1994/02/03>.
(/usr/users/software/tex/lib/tex/latex2e/size12.clo)
\c@part=\count84
\c@section=\count85
\c@subsection=\count86
\c@subsubsection=\count87
\c@paragraph=\count88
\c@subparagraph=\count89
\c@figure=\count90
\c@table=\count91
\abovecaptionskip=\skip41
\belowcaptionskip=\skip42
Compatibility mode: redefinition of \rm ignored.
Compatibility mode: redefinition of \sf ignored.
Compatibility mode: redefinition of \tt ignored.
Compatibility mode: redefinition of \bf ignored.
Compatibility mode: redefinition of \it ignored.
Compatibility mode: redefinition of \sl ignored.
Compatibility mode: redefinition of \sc ignored.
\bibindent=\dimen107
) (htx.sty
(/usr/users/software/tex/lib/tex/inputs/psfig.tex
\@unused=\write4

psfig/tex 1.9
\ps@stream=\read1
\p@intvaluex=\dimen108
\p@intvaluey=\dimen109
) (/usr/users/faculty/rms/inputs/graphics.sty
(/usr/users/faculty/rms/inputs/trig.sty))
(/usr/users/software/tex/lib/tex/latex2e/ifthen.sty
Package: `ifthen' v0.1e <1994/01/24> (DPC)
English documentation     <1994/02/11> (DPC)
)
\modnum=\box25
\glossbox=\box26
\c@qctr=\count92
\c@actr=\count93
\c@ectr=\count94
\imagebox=\box27
\imagewidth=\dimen110
\imageheight=\dimen111
 (/usr/users/software/tex/lib/tex/inputs/fancyheadings.sty
\headrulewidth=\dimen112
\footrulewidth=\dimen113
\plainheadrulewidth=\dimen114
\plainfootrulewidth=\dimen115
\headwidth=\dimen116
)
(/usr/users/software/tex/lib/tex/inputs/code.sty
\codetopsep=\skip43
\codebottomsep=\skip44
)) (abss.aux)
Font Note: Check substitution defaults for T1/cmr/m/n on input line 5.
Font Note: ... okay on input line 5.
Font Note: Check substitution defaults for OT1/cmr/m/n on input line 5.
Font Note: ... okay on input line 5.
Font Note: Check substitution defaults for OML/cmm/m/it on input line 5.
Font Note: ... okay on input line 5.
Font Note: Check substitution defaults for OMS/cmsy/m/n on input line 5.
Font Note: ... okay on input line 5.
Font Note: Check substitution defaults for OMX/cmex/m/n on input line 5.
Font Note: ... okay on input line 5.
Font Note: Check substitution defaults for U/cmr/m/n on input line 5.
Font Note: ... okay on input line 5.

psfig: searching mmcc.ps for bounding box
psfig: including mmcc.ps 
Font Note: No math setup on input line 11.
Font Note: External font `cmex10' loaded for size <12> on input line 11.
Font Note: External font `cmex10' loaded for size <8> on input line 11.
Font Note: External font `cmex10' loaded for size <6> on input line 11.
Font Note: Try loading font information for U+lasy on input line 11.
(/usr/users/software/tex/lib/tex/latex2e/Ulasy.fd
Fontdef file produced from: `latexsym.dtx' v2.1a <93/12/06> (FMi and RmS)
)
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []
..\glue 0.0 plus 1.0fil minus 1.0fil


[1

]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\glue 0.0 plus 1.0fil minus 1.0fil
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []


[2]
Overfull \hbox (1.69058pt too wide) in paragraph at lines 132--135
[] []\OT1/cmr/m/n/12 Problems with sig-nif-i-cant database ac-tiv-ity. While mo
st spread-sheets can do lim-ited database

\hbox(8.33331+2.33331)x468.54852, glue set - 1.0
.\hbox(0.0+0.0)x0.0
.\glue 0.0
.\hbox(5.33334+0.0)x0.0
..\glue 0.0
..\glue -23.49976
..\glue -5.87494
..\hbox(5.33334+0.0)x23.49976, glue set 23.49976fil
...\glue 0.0 plus 1.0fil minus 1.0fil
...\hbox(5.33334+0.0)x0.0, glue set - 6.00002fil []
..\glue 5.87494
.\penalty 0
.\OT1/cmr/m/n/12 P
.etc.


Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []
..\glue 0.0 plus 1.0fil minus 1.0fil


[3]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\glue 0.0 plus 1.0fil minus 1.0fil
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []


[4]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []
..\glue 0.0 plus 1.0fil minus 1.0fil


[5]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\glue 0.0 plus 1.0fil minus 1.0fil
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []


[6]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []
..\glue 0.0 plus 1.0fil minus 1.0fil


[7]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\glue 0.0 plus 1.0fil minus 1.0fil
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []


[8]
psfig: searching showfrm.ps for bounding box
psfig: including showfrm.ps 

Overfull \hbox (1.20647pt too wide) in paragraph at lines 440--441
 [] 

\hbox(122.13623+0.0)x468.54852
.\glue(\leftskip) 0.0 plus 1.0fil
.\hbox(122.13623+0.0)x469.75499
..\vbox(122.13623+0.0)x469.75499
...\special{ps::[begin] 30785863 8004320 986726 19931873 39271710 30128046 star
tT\ETC.}
...\special{ps: plotfile showfrm.ps }
...\special{ps::[end] endTexFig  }
...\vbox(122.13623+0.0)x469.75499, glue set 122.13623fil []
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0 plus 1.0fil


Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []
..\glue 0.0 plus 1.0fil minus 1.0fil


[9]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\glue 0.0 plus 1.0fil minus 1.0fil
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []


[10]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []
..\glue 0.0 plus 1.0fil minus 1.0fil


[11]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\glue 0.0 plus 1.0fil minus 1.0fil
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []


[12]
Overfull \hbox (0.85524pt too wide) in paragraph at lines 762--765
[]\OT1/cmr/bx/n/12 Q. 12  \OT1/cmr/m/n/12 In the spread-sheet above, which of t
he fol-low-ing for-mu-las would act just like ``=B6*[]C[]3''?

\hbox(9.0+2.33331)x497.92322, glue set - 1.0
.\hbox(0.0+0.0)x0.0
.\OT1/cmr/bx/n/12 Q
.\OT1/cmr/bx/n/12 .
.\glue 4.5 plus 2.25 minus 1.5
.\OT1/cmr/bx/n/12 1
.etc.


Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []
..\glue 0.0 plus 1.0fil minus 1.0fil


[13]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\glue 0.0 plus 1.0fil minus 1.0fil
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []


[14]
psfig: searching area.ps for bounding box
psfig: including area.ps 

Overfull \hbox (3.95178pt too wide) in paragraph at lines 877--878
 [] 

\hbox(295.10251+0.0)x497.92322
.\glue(\leftskip) 0.0 plus 1.0fil
.\hbox(295.10251+0.0)x501.875
..\vbox(295.10251+0.0)x501.875
...\special{ps::[begin] 32890880 19339838 3683778 15392931 36574658 34732769 st
ar\ETC.}
...\special{ps: plotfile area.ps }
...\special{ps::[end] endTexFig  }
...\vbox(295.10251+0.0)x501.875, glue set 295.10251fil []
.\penalty 10000
.\glue(\parfillskip) 0.0
.\glue(\rightskip) 0.0 plus 1.0fil

psfig: searching barcht.ps for bounding box
psfig: including barcht.ps 

Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []
..\glue 0.0 plus 1.0fil minus 1.0fil


[15]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\glue 0.0 plus 1.0fil minus 1.0fil
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []


[16]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []
..\glue 0.0 plus 1.0fil minus 1.0fil


[17]
psfig: searching colcht.ps for bounding box
psfig: including colcht.ps 
psfig: searching linecht.ps for bounding box
psfig: including linecht.ps 
psfig: searching piecht.ps for bounding box
psfig: including piecht.ps 
psfig: searching scatter.ps for bounding box
psfig: including scatter.ps 
psfig: searching 3Dcht.ps for bounding box
psfig: including 3Dcht.ps 

Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\glue 0.0 plus 1.0fil minus 1.0fil
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []


[18]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []
..\glue 0.0 plus 1.0fil minus 1.0fil


[19]
psfig: searching mislead.ps for bounding box
psfig: including mislead.ps 

Underfull \vbox (badness 6396) has occurred while \output is active
\vbox(662.9493+0.0)x497.92322, glue set 4.00195
.\vbox(341.91331+0.0)x497.92322
..\penalty -51
..\glue 13.0 plus 6.0 minus 8.0
..\glue(\parskip) 0.0
..\hbox(289.08+0.0)x497.92322, glue set 41.68724fil
...\glue(\leftskip) 0.0 plus 1.0fil
...\hbox(0.0+0.0)x0.0
...\glue 0.0
...\hbox(0.0+0.0)x0.0 []
...\penalty 0
...etc.
..\penalty -51
..etc.
.\glue 12.0 plus 2.0 minus 4.0
.\glue -12.0 plus -2.0 minus -4.0
.\glue 20.0 plus 2.0 minus 4.0
.\glue(\topskip) 3.66669
.etc.


Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\glue 0.0 plus 1.0fil minus 1.0fil
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []


[20]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []
..\glue 0.0 plus 1.0fil minus 1.0fil


[21]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\glue 0.0 plus 1.0fil minus 1.0fil
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []


[22]
psfig: searching sampless.ps for bounding box
psfig: including sampless.ps 

Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []
..\glue 0.0 plus 1.0fil minus 1.0fil


[23]
Overfull \hbox (4.31238pt too wide) in paragraph at lines 1178--1181
[] []\OT1/cmr/m/n/12 A spe-cial kind of for-mat-ting that de-scribes how data w
ill be rep-re-sented. Changes

\hbox(8.33331+2.33331)x468.54852, glue set - 1.0
.\hbox(0.0+0.0)x0.0
.\glue 0.0
.\hbox(8.33331+2.33331)x63.36136
..\glue -29.3747
..\glue 0.0
..\glue -5.87494
..\hbox(8.33331+2.33331)x92.73605
...\glue 5.87494
...\OT1/cmr/bx/n/12 c
...\OT1/cmr/bx/n/12 e
...\OT1/cmr/bx/n/12 l
...\OT1/cmr/bx/n/12 l
...etc.
..\glue 5.87494
.\penalty 0
.\OT1/cmr/m/n/12 A
.etc.


Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\glue 0.0 plus 1.0fil minus 1.0fil
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []


[24]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []
..\glue 0.0 plus 1.0fil minus 1.0fil


[25] (abssans.tex
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\glue 0.0 plus 1.0fil minus 1.0fil
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []


[26])
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []
..\glue 0.0 plus 1.0fil minus 1.0fil


[27]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\glue 0.0 plus 1.0fil minus 1.0fil
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []


[28]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []
..\glue 0.0 plus 1.0fil minus 1.0fil


[29]
Overfull \vbox (2.49998pt too high) has occurred while \output is active
\vbox(12.0+0.0)x497.92322
.\glue 0.0 plus 1.0fil
.\hbox(14.49998+0.0)x497.92322
..\glue 0.0 plus 1.0fil minus 1.0fil
..\hbox(14.49998+0.0)x497.92322
...\vbox(14.49998+0.0)x497.92322 []


[30

] (abss.aux) ) 
Here is how much of TeX's memory you used:
 1028 strings out of 3932
 9582 string characters out of 54355
 58756 words of memory out of 262141
 3312 multiletter control sequences out of 9500
 13245 words of font info for 48 fonts, out of 72000 for 255
 14 hyphenation exceptions out of 607
 26i,11n,29p,237b,373s stack positions out of 300i,40n,60p,3000b,4000s

Output written on abss.dvi (30 pages, 71388 bytes).